Precor C932 - Manual (Page 3)

page 3
C O M M E R C I A L P R O D U C T S D I V I S I O N
IMPOR
T
ANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
• Never step off the treadmill while the running belt is moving. Keep your body and
head facing forward. Never attempt to turn around on the treadmill.
• Never turn ON the treadmill when someone is standing on the machine.
• Never block the air openings on the hood while operating the treadmill. Keep the
air openings clean and free of lint, hair, or anything that might impeded the free
flow of air. Never drop or insert objects into any opening.
• Wear proper exercise clothing and shoes during a workout—no loose clothing. Tie
long hair back. Keep all loose towels away from the running surface. The running
belt will not stop immediately if an object becomes caught in the belt or rollers.
• Do not rock the unit. Do not stand on the display console or hood.
• Do not overexert yourself or work to exhaustion. If you feel any pain or abnormal
symptoms, stop your workout immediately and consult your physician.
SAFETY APPROVAL
When identified with the ETL-c logo, the treadmill has been tested and conforms to the require-
ments of CAN/CSA-E-335-1/3-94, Safety of Household and Similar Electrical Appliances.
GROUNDING INSTRUCTIONS
The C932 Low Impact Treadmill must be grounded. If it should malfunction or break down,
grounding provides a path of least resistance for electric current which reduces the risk of
electrical shock. The treadmill is equipped with a power cord having an equipment-ground-
ing conductor and a grounding plug. The plug must be inserted into an appropriate outlet that
is properly installed and grounded in accordance with all local codes and ordinances. If you
do not follow these
Grounding Instructions, you could void the Precor limited warranty.
DANGER —
Improper connection of the equipment-grounding conductor
IMPORTANT SAFETY INSTRUCTIONS
120V Units and 240V Units Designated for U.S. Markets
The C932 treadmill must be connected to a dedicated, grounded circuit. A 20 amp dedicated
circuit is recommended. The treadmill is factory-equipped with a specific power supply cord
to permit connection to a proper electric circuit as shown in Diagram 1. The power outlet must
have the same configuration as the plug. No adapter should be used with this product.
can result in a risk of electric shock. Check with a qualified electrician or service
person if you are in doubt as to whether the treadmill is properly grounded. Do not
modify the plug provided with the treadmill—if it doesn’t fit the outlet, get a proper
outlet installed by a qualified technician.
Diagram 1
Correct power
plug for U.S.
Markets:
120-volt and
240-volt.
120-volt grounding plug 240-volt grounding plug