Paxar Sierra Sport2 9460 User Manual
Page 24
2-12 System Administrator’s Guide
Communications
Use this menu to check the communications port and cable. You need a
loopback plug for this test. The loopback plug can be purchased at your
local electronics store. See Appendix A, "Specifications" for cable pin-
out information.
Main Menu
To exit, press
F at any time.
1. From the Diagnostics menu, select Comm.
Insert
loopback
Plug into serial
Port
connector.
Press key to cont.
2. Press any
A to continue.
The serial port test is performed.
Serial
port
test
Testing speed: ok
Testing parity: ok
Testing CTRLS: ok
Press key to cont.
3. Follow the instructions on the display. When you are finished, you
return to the Diagnostics menu.
Diagnostics
Online Diag.
Setup
Service
File System
Exit
Printer
Display
Keyboard
Comm.
RAM
Data
Dump
About
Exit