Paxar Sierra Sport2 9460 - Manual (Page 44)

3-16 System Administrator’s Guide
5. Press A under ↵ to continue. You see a message that the printer is
calibrating the supply.
SUCCESSFUL
↵ X
The printer does not feed labels while calibrating. The printer
records the sensor value read from the liner.
Note: If you get a FAILED message: turn off the printer and repeat the
process. If it fails again, call Service.
6. Press A under ↵ or press A under X to return to the Stock Sensor
menu.
7. Press F to return to the Printer menu.
Selecting the Black Mark Sensor
1. From the Printer menu, select Stock Sensor, Black Mark.
Black Mark Sensor
Selected
↵
2. Press A under ↵.
Insert label...
Then hit Enter
↵ ±