Paxar Sierra Sport2 9460 User Manual
Page 35
Setting Up the Printer 3-7
Adjusting the Print Contrast
Contrast controls the darkness of the printing on your supply. The range
is between -28 to 40. The default is 0.
You may need to adjust your contrast based on which supply you are
using. Linerless supplies may need a higher or lower contrast setting.
Receipt paper requires a lower contrast setting.
For linerless or synthetic supplies, you must select High Energy from the
Stock Energy menu.
1. From the Setup menu, select Printer, Contrast.
Contrast
+00
↵
f +
Use
A as shown in the following table:
↵
f
+
Press
A to
Press
A to
Press
A to
Enter
Save the setting
Set the position (+00)
1st position
2nd position
3rd position
Toggle between
positive and negative
Increase the setting
by 10
Increase the setting by 1
2. When the setting you want is displayed, press
A under ↵ to save the
setting.
You return to the Printer menu.