Message display – Panasonic DMC-TS1 User Manual

Page 132

Advertising
background image

VQT1Z45

132

Others

Message Display

Confirmation messages or error messages will be displayed on the screen in some cases.
The major messages are described below as examples.

[THIS MEMORY CARD IS LOCKED]

> The Write-Protect switch on the SD Memory Card and the SDHC Memory Card are

moved to [LOCK]. Move the switch back to unlock it. (P21)

[NO VALID PICTURE TO PLAY]

> Record a picture or insert a card with a recorded picture and then play it.

[THIS PICTURE IS PROTECTED]

> Delete the picture after canceling the protect setting. (P109)

[THIS PICTURE CANNOT BE DELETED]/[SOME PICTURES CANNOT BE DELETED]

Pictures not based on the DCF standard cannot be deleted.

> If you want to delete some pictures, format the card after saving necessary data on a PC

etc. (P32)

[NO ADDITIONAL SELECTIONS CAN BE MADE]

The number of pictures, which can be set at one time when [MULTI] has been selected for
[DELETE MULTI] (P45), [FAVORITE] (P107), [TITLE EDIT] (P101), [TEXT STAMP] (P102) or
[RESIZE] (P104) has been exceeded.

> Reduce the number of pictures set, and then repeat the operation.

More than 999 favorites have been set.

[CANNOT BE SET ON THIS PICTURE]

[TITLE EDIT], [TEXT STAMP] or [PRINT SET] cannot be set for pictures not based on the
DCF standard.

[NOT ENOUGH SPACE ON BUILT-IN MEMORY]/[NOT ENOUGH MEMORY ON THE
CARD]

There is no space left on the built-in memory or the card.

When you copy pictures from the built-in memory to the card (batch copy), the pictures are
copied until the capacity of the card becomes full.

[SOME PICTURES CANNOT BE COPIED]/[COPY COULD NOT BE COMPLETED]

The following pictures cannot be copied.

When a picture with the same name as the picture to be copied exists in the copy
destination. (Only when copying from a card to the built-in memory.)

Files not based on the DCF standard.

Moreover, pictures recorded or edited by other equipment may not be copied.

[BUILT-IN MEMORY ERROR
FORMAT BUILT-IN MEMORY?]

This message will be displayed when you format the built-in memory on a PC.

> Format the built-in memory on the camera again. (P32) The data on the built-in memory

will be deleted.

VQT1Z45~_eng.book 132 ページ 2009年1月28日 水曜日 午後9時30分

Advertising