Panasonic DMC-TS1 - Manual (Page 48)

VQT1Z45
48
Advanced (Recording pictures)
[REC] mode:
ñ· ¿¨
Taking Pictures using the Built-in Flash
Set the flash to match the recording.
Press 1 [‰].
Press 3/4 to select a mode.
• You can also press 1 [‰] to select.
• For information about flash settings that can be selected, refer to
“ Available flash settings by recording mode ” . (P49)
Press [MENU/SET].
• You can also press the shutter button halfway to finish.
• The menu screen disappears after about 5 seconds. At this time, the selected item is
automatically set.
A Photo flash
Do not cover it with your fingers or other objects.
Switching to the appropriate flash setting
Item Description of settings
‡: AUTO
The flash is automatically activated when the recording conditions make
it necessary.
:
AUTO/Red-eye
reduction
¢
The flash is automatically activated when the recording conditions make
it necessary.
It is activated once before the actual recording to reduce the red-eye
phenomenon (eyes of the subject appearing red in the picture) and then
activated again for the actual recording.
• Use this when you take pictures of people in low lighting conditions.
‰: Forced flash ON
:
Forced ON/Red-eye
reduction
¢
The flash is activated every time regardless of the recording conditions.
• Use this when your subject is back-lit or under fluorescent light.
• The flash setting is set to [ ] only when you set [PARTY] or
[CANDLE LIGHT] in scene mode. (P58)
:
Slow sync./Red-eye
reduction
¢
If you take a picture with a dark background landscape, this feature will
slow the shutter speed when the flash is activated so that the dark
background landscape will become bright. Simultaneously it reduces the
red-eye phenomenon.
• Use this when you take pictures of people in front of a dark
background.
Œ: Forced flash OFF
The flash is not activated in any recording conditions.
• Use this when you take pictures in places where the use of the
flash is not permitted.
VQT1Z45~_eng.book 48 ページ ２００９年１月２８日 水曜日 午後９時３０分