Panasonic DMC-TS1 - Manual (Page 80)

VQT1Z45
80
Advanced (Recording pictures)
Note
• Return the setting to [HOME] when the vacation is finished by performing steps
1
,
2
and
3
.
• If [HOME] is already set, change only the travel destination, and use.
• If you cannot find the travel destination in the areas displayed on the screen, set by the time
difference from the home area.
• Except for the motion pictures recorded in [AVCHD Lite], the pictures recorded at travel
destination will display [“] on the screen when played back.
Select [WORLD TIME] from the [SETUP] menu,
and then press
1.
• When first using the camera after purchasing it, the
[PLEASE SET THE HOME AREA] message appears.
Press [MENU/SET], and set the home area on the screen in
step
3
.
Press 4 to select [HOME], and then press
[MENU/SET].
Press 2/1 to select the home area, and then
press [MENU/SET].
A Current time
B Time difference from GMT (Greenwich Mean Time)
• If daylight saving time [ ] is used at the home area, press
3. Press 3 again to return to the original time.
• The daylight saving time setting for the home area does not
advance the current time. Advance the clock setting by one
hour.
Press 3 to select [DESTINATION] and then
press [MENU/SET] to set.
C Depending on the setting, the time at the travel destination
area or the home area is displayed.
Press 2/1 to select the area the travel
destination is in and then press [MENU/SET] to
set.
D Current time of the destination area
E Time difference
• If daylight saving time [ ] is used at the travel destination,
press 3. (The time advances by one hour.) Press 3 again to
return to the original time.
Press [MENU/SET] to close the menu.
A
B
C
E
D
E
D
VQT1Z45~_eng.book 80 ページ ２００９年１月２８日 水曜日 午後９時３０分