Taking pictures with the self-timer – Panasonic DMC-TS1 User Manual
Page 54
VQT1Z45
54
Advanced (Recording pictures)
[REC] mode:
ñ·
¿¨
Taking Pictures with the Self-timer
Note
•
When using a tripod etc., setting the self-timer to 2 seconds is a convenient way to avoid the
jitter caused by pressing the shutter button.
•
When you press the shutter button once fully, the subject is automatically focused just before
recording. In dark places, the self-timer indicator will blink and then may turn on brightly,
operating as an AF assist lamp (P91) to allow the camera to focus on the subject.
•
We recommend using a tripod when recording with the self-timer.
•
The number of pictures which can be taken in [BURST] is fixed to 3.
•
The number of pictures which can be taken in [FLASH BURST] in scene mode is fixed to 5.
•
Self-timer cannot be set to 2 seconds in Intelligent Auto Mode.
•
Self-timer cannot be set to 10 seconds in [SELF PORTRAIT] in scene mode or Clipboard
Mode.
•
Setting of the self-timer cannot be performed in the following conditions:
–
In [HI-SPEED BURST] and [UNDERWATER] in scene mode
–
When recording motion pictures
Press 2 [ë].
Press 3/4 to select a mode.
•
You can also press 2 [ë] to select.
Press [MENU/SET].
•
You can also press the shutter button halfway to finish.
•
The menu screen disappears after about 5 seconds. At this time, the selected item is
automatically set.
Press the shutter button halfway to focus
and then press it fully to take the picture.
•
The self-timer indicator A blinks and the shutter is
activated after 10 seconds (or 2 seconds).
•
If you press [MENU/SET] while the self-timer is set, the
self-timer setting is canceled.
VQT1Z45~Body1_mst.fm 54 ページ ２００９年１月２９日 木曜日 午前１０時４３分