Panasonic DMC-TS1 User Manual
Page 30
VQT1Z45
30
Preparation
•
When the [RESET] setting is selected during recording, the operation that resets the lens is
also performed at the same time. You will hear the sound of the lens operating but this is
normal and not indicative of malfunctioning.
•
When the [REC] mode settings are reset, data registered with [FACE RECOG.] will be also
reset, too.
•
When [SETUP] menu settings are reset, the following settings are also reset. In addition,
[ROTATE DISP.] (P106) is set to [ON], and [FAVORITE] (P107) is set to [OFF] in [PLAYBACK]
mode menu.
–
The birthday and name
settings for [BABY1]/[BABY2] (P62) and [PET] (P63) in scene mode.
–
The settings of [TRAVEL DATE] (P78) (departure date, return date, location)
–
The [WORLD TIME] (P79) setting.
•
The folder number and the clock setting are not changed.
•
When [PC] is selected, the camera is connected via the “USB Mass Storage” communication
system.
•
When [PictBridge(PTP)] is selected, the camera is connected via the “PTP (Picture Transfer
Protocol)” communication system.
•
This will work when the AV cable is connected.
w [RESET]
The [REC] or [SETUP] menu settings are reset to the initial
settings.
x [USB MODE]
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection
cable (supplied).
y [SELECT ON CONNECTION]:
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z [PC]:
Set after or before connecting to a PC.
[TV ASPECT]
Set to match the type of TV.
(Playback mode only)
[W]:
When connecting to a 16:9 screen TV.
[X]:
When connecting to a 4:3 screen TV.
VQT1Z45~_eng.book 30 ページ ２００９年１月２８日 水曜日 午後９時３０分