Panasonic DMC-TS1 - Manual (Page 42)

VQT1Z45
42
Basic
Note
• The digital zoom cannot be set when õ, or ¨ has been selected.
• The indicated zoom magnification is an approximation.
• “EZ” is an abbreviation of “Extended optical Zoom”.
• The optical zoom is set to Wide (1 k) when the camera is turned on.
• If you use the zoom function after focusing on the subject, focus on the subject again.
• When using the digital zoom, [STABILIZER] may not be effective.
• When using the digital zoom, we recommend using a tripod and the self-timer (P54) for taking
pictures.
• The extended optical zoom cannot be used in the following cases:
– In Macro Zoom Mode
– In [TRANSFORM], [HIGH SENS.], [HI-SPEED BURST], [FLASH BURST], [PIN HOLE] or
[FILM GRAIN] in scene mode
– when recording motion pictures
• [DIGITAL ZOOM] cannot be used in the following cases:
– In [TRANSFORM], [BABY1]/[BABY2], [PET], [HIGH SENS.], [HI-SPEED BURST],
[FLASH BURST], [PIN HOLE] or [FILM GRAIN] in scene mode
– When [INTELLIGENT ISO] is set
[PLAYBACK] Mode:
¸
Playing back Pictures
([NORMAL PLAY])
• Speed of picture forwarding/rewinding changes depending on the playback status.
∫ Fast forwarding/Fast rewinding
Press and hold
2/1 during playback.
• The file number A and the picture number B only
change one by one. Release 2/1 when the number of
the desired picture appears to play back the picture.
• If you keep pressing 2/1, the number of pictures forwarded/rewound increases.
∫ To finish playback
Press [(] again, press the motion picture button or press the shutter button
halfway.
Press [(].
A [(] button
• When the mode dial is set to [¨] , clipboard will
be displayed. Refer to
“ Viewing clipboard
pictures ” (P93) for information about playing
back the clipboard.
Press 2/1 to select the picture.
2: Play back the previous picture
1: Play back the next picture
2: Fast rewind
1: Fast forward
A
B
VQT1Z45~_eng.book 42 ページ ２００９年１月２８日 水曜日 午後９時３０分