Panasonic PANAFAX UF-333 - Manual (Page 128)

124
Troubleshooting
Replacing the Battery
During the initial self test, when the power is turn ”On”, the machine will evaluate the condition of the back
up battery. If the battery is weak or fully discharged, the following message will be shown on the display.
REPLACE BATTERY
INFO. CODE=026
To replace the battery, follow the procedure below:
Print a File List to confirm that there is no file stored in memory. (See Note 1)
To print a File List, press FUNCTION , 9 , 1 and SET .
ࠡ
Disconnect the Power Cord.
ࠢ
Remove the Memory Card Cover.
ࠣ
Remove the Battery by sliding it inward and
then out of the socket.
CAUTION !
Dispose the battery properly and keep it
away from small children.
ࠡ Install the new battery (Order No.: CR 2032)
with the
⊕
side facing out.
ࠢ
Re-install the Memory Card Cover.
ࠣ
Connect the Power Cord.
If the clock is flashing on the LCD Display, follow the procedure on page 24 to reset the clock.
1. If the power is turned ”Off” and the battery is weak or fully discharged, the transmit and polling information
of a file stored in memory may be lost. However the received document(s) in memory will be preserved and
will print out automatically after the power is restored.
2. The service life of the battery is approximately 1 year when the machine is turned ”Off”.
08001000001
08001020019
08001050024
08001050025
08001060073
2
ࠢ
ࠣ
08001060067 3
ࠡ
ࠢ
08001060068
08001060074
Note:
08001070012
08001070014
1
4