Panasonic PANAFAX UF-333 - Manual (Page 63)

59
Sending Documents
Redialing
Automatic Redialing
If the line is busy, your machine will redial the number up to 5 times
at 3 minutes interval. During that time, a message will appear as
shown to the right.
A file number is shown at the upper right corner of the display if it
is a memory transmission file.
Manual Redialing
You can also redial the last dialed number manually by pressing REDIAL key.
To redial the last dialed number through memory
Set document(s) face down.
Make sure that the MEMORY lamp is on.
PAUSE/
REDIAL
START
The document is stored into memory with a file number.
Then dials the last dialed number.
To redial the last dialed number through ADF
Set document(s) face down.
Make sure that the MEMORY lamp is off.
PAUSE/
REDIAL
Your machine starts to dial the last dialed number.
1. While the unit is displaying ”WAIT TO DIAL”, you can press REDIAL to start redialing immediately.
2. While the unit is displaying ”DIALING” and a message is heard through the monitor that the circuits are
busy....., you can press REDIAL to start redialing immediately.
04003000002
04003010007
04003020013
04003050009
04003020014
04003050008
04003990006
04003060070
04003060048
04003060049
04003990007
04003060050
04003060069
Note:
04003070027
04003070028
WAIT TO DIAL NO.001
(Telephone number)
ENTER STATION(S)
THEN PRESS START 00%
TEL. NO.
5551234
* STORE * NO.002
PAGES=01 01%
* DIALING * NO.002
5551234
ENTER STATION
00%
TEL. NO.
5551234
* DIALING *
5551234
4
1
2
3
1
2