Panasonic PANAFAX UF-333 - Manual (Page 134)

130
Paper Specifications
In general, most plain bond papers will produce excellent results. Most photocopy papers will also work very
well. There are many ”name” and ”generic” brands of paper available. Before purchasing large quantities, we
recommend that you test various paper samples until you obtain the results you are looking for.
The following table summarizes the major specifications to consider when selecting white or colored paper.
Basic Weight 16 to 24 lb (60 to 90 g/m
2
)
Cut Edge Conditions Cut with sharp blades, no visible frayed edges
Finished Dimensions

0.03” (0.8 mm) of nominal, corners 90
° 
0.2
°
Grain Long grain
Moisture Content 4% to 6% by weight
Opacity 84% minimum
Packing Polylaminated moisture-proof ream wrap
Sizes Letter : 8.5” x 11” (216 mm x 279 mm)
A4 : 8.3” x 11.7” (210 mm x 297 mm)
Legal : 8.5” x 14” (216 mm x 356 mm)
Type Cut sheet
Wax Pick 12” (304.8 mm) minimum (Dimension)
1. It is possible that the paper meets the specifications listed above and still not print well because of the variations
in the manufacturing. Therefore, we recommend that you test thoroughly before purchasing in large quantity.
2. Poor quality paper may reduce print quality and cause paper jams and other problems. If you encounter
problems, switch to a higher grade of paper.
09009000001
09002030002
Note:
09002070001
09009070002