Panasonic PANAFAX UF-333 - Manual (Page 56)

52
Sending Documents
Manual Number Dialing
To dial the telephone number manually, follow the steps below.
Set document(s) face down.
MEMORY
Make sure that the MEMORY lamp is on.
If not, press MEMORY to set ”On”.
Enter a telephone number from the keypad.
Ex: 5 5 5 1 2 3 4
START
The document is stored into memory with a file number.
Then starts to dial the telephone number.
1. If you need a special access number to get an outside line, dial it first then press PAUSE to enter a
pause (represented by a ”–”) before dialing the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing, press
TONE (represented by a ”/”).
The dialing mode will be changed from Pulse to Tone after dialing the digit ”/”.
Ex: 9 PAUSE TONE 5551234
04003000001
04003010002
04003990003
04003060074
#@multitude
04003060075
#@multitude
04003060003
04003060059
#@multitude
Note:
04003070007
#@multitude
04003070008
#@multitude
ENTER STATION
00%
ENTER STATION(S)
THEN PRESS START 00%
TEL. NO.
5551234
* STORE * NO.002
AAAAAA PAGES=01 05%
* STORE * COMPLETED
TOTAL PAGES=05 25%
* DIALING * NO.002
5551234
1
2
3
4