Panasonic PANAFAX UF-333 - Manual (Page 28)

24
User Parameters
Your facsimile machine has several basic settings (User Parameters) to help you keep records of the documents
you send or receive. For example, the built-in clock keeps the current date and time, and your LOGO and ID
Number help to identify you when you send or receive documents.
Setting the Date and Time
At standby the display will show the date and time. Once the standby display is set, it will automatically be
updated.
FUNCTION 7
1
SET
Enter the new date and time.
Ex: 0 9 Month : September
1 2 Date : 12th
1 9 9 9 Year : 1999
1 5 0 0 Time : 3:00 PM
If you make a mistake, use < or > to move the cursor to
the incorrect number and enter the new number over it.
SET
STOP
1. The clock of your machine is equipped with D.S.T (Daylight Saving Time) system. So, your clock will
automatically set the time forward from 2:00 AM to 3:00 AM on the first Sunday of April and set the
time back from 2:00 AM to 1:00 AM on the last Sunday of October.
If your state does not use the D.S.T. system, change the Fax Parameter No. 35 (DAYLIGHT TIME)
to ”Invalid” (see page 37).
2. The current Date & Time must be set because it is required by the Telephone Consumer Act of
1991. (For details, see FCC NOTICE at the end of this User’s Guide)
02009000002
02009030002
02009020001
02009050001
02007060008
#@multitude
02009060001
#@multitude
02009060002
02009060003
02007060005
#@multitude
Note:
02009070002
02009070003
SET MODE (1–4)
ENTER NO. OR
Ɵƞ
1:USER PARAMETERS?
PRESS SET TO SELECT
DATE & TIME
1–01–0000 00:00
DATE & TIME
09–12–1999 15:00
1
2
3
4
5