Panasonic PANAFAX UF-333 - Manual (Page 38)

34
Customizing Your Machine
Your facsimile machine has a variety of adjustable Fax Parameters. These parameters, listed in the Parameter
Table, are preset for you and do not need to be changed. If you do want to make a change, read the table
carefully. Some parameters, such as the Resolution and Contrast parameters, can be temporarily changed by
simple key operation just before a transmission is made. When the transmission ends, however, these
parameters return to their preset values (Home position). Other parameters can only be changed by the
procedure described below.
Setting the Fax Parameters
FUNCTION 7
4 SET
Enter Fax Parameter number from the Parameter Table
(see pages 35 to 37).
Ex: 0 1 for CONTRAST
SET
Enter the new setting value.
Ex: 2 for LIGHTER
SET
To set another parameter, press CLEAR to return to
step 3, or, to return to standby, press STOP .
1. To scroll the Fax Parameters in Step 2 or 4, press or .
2. To print out a Fax Parameter List, see page 109.
03002000002
03002030003
03002020001
02007060008
#@multitude
03002060001
03002060009
03002060006
03002060007
03002060005
Note:
03002070001
03002070002
SET MODE (1–4)
ENTER NO. OR
Ɵƞ
FAX PARAMETER(01–99)
NO.=
FAX PARAMETER(01–99)
NO.=01
01 CONTRAST
1:NORMAL
01 CONTRAST
2:LIGHTER
02 RESOLUTION
1:STANDARD
1
2
3
4
5
6