Panasonic PT-AE3000E - Manual (Page 30)

Settings
Menu Navigation
30 -
E
NGLISH
The menu options are structured and categorised. You can navigate through the menu with F G H I buttons. See
“Menu Navigation” on page 29.
PICTURE
POSITION
Main menu and sub-menu
NOTE:
• The underlined items are factory default settings.
• Some default settings vary by the selected input signal.
• Sub-menu items vary according to the selected input signal.
• Some settings are adjustable without any signals.
PICTURE MODE page 32
NORMAL DYNAMIC
COLOUR1 COLOUR2
CINEMA1 CINEMA2
CINEMA3
CONTRAST page 32
(Default: 0)
BRIGHTNESS page 32
(Default: 0)
COLOUR page 32
(Default: 0)
TINT page 32
(Default: 0)
SHARPNESS page 32
(Default: 0)
COLOUR TEMPERATURE page 33
(Default: 0)
DYNAMIC IRIS page 33
ON OFF
WAVEFORM MONITOR page 33
OFF
FULL SCAN(Y)
FULL SCAN(R)
FULL SCAN(G) FULL SCAN(B)
SINGLE LINE SCAN(Y)
SINGLE LINE SCAN(R)
SINGLE LINE SCAN(G)
SINGLE LINE SCAN(B)
MONITOR POSITION
AUTO ADJUST
SPLIT ADJUST page 33
AREA SELECT SPLIT ADJUST MODE
NORMAL REVERSE
ADVANCED MENU page 34
GAMMA
GAMMA HIGH (Default: 0)
GAMMA MID (Default: 0)
GAMMA LOW (Default: 0)
CONTRAST
CONTRAST R (Default: 0)
CONTRAST G (Default: 0)
CONTRAST B (Default: 0)
BRIGHTNESS
BRIGHTNESS R (Default: 0)
BRIGHTNESS G (Default: 0)
BRIGHTNESS B (Default: 0)
G
F
NR (Noise Reduction)
(Default: 0)
MPEG NR
(Default: 0)
FRAME CREATION
OFF MODE1 MODE2
COLOUR MANAGEMENT
PROFILE CURSOR
LOG PROFILE SAVE
PROFILE DELETE PROFILE NAME CHANGE
x.v.Colour
ON OFF
DETAIL CLARITY
ON OFF
CINEMA REALITY
ON OFF
TV-SYSTEM
AUTO
NTSC
NTSC 4.43
PAL PAL-M
PAL-N SECAM
MEMORY SAVE page 36
MEMORY1 - 16
MEMORY LOAD page 36
MEMORY1 - 16
MEMORY EDIT page 36
MEMORY DEL MEMORY NAME CHANGE
SIGNAL MODE page 36
H - POSITION page 37
(Default: 0)
V - POSITION page 37
(Default: 0)
DOT CLOCK page 37
(Default: 0)
CLOCK PHASE page 37
(Default: 0)
ASPECT page 37
4:3 16:9 14:9 ZOOM1
ZOOM2 JUST
WSS page 39
G