Panasonic PT-AE3000E - Manual (Page 35)

PICTURE menu
E
NGLISH - 35
Settings
J MPEG NR
You can adjust the automatic noise reduction
system level for MPEG format images. The system
minimise block noise and mosquito noise to
eliminate jagged edges, providing an overall
smoother image. Press I H to change the level.
Setting range: 0 to +3
J FRAME CREATION
You can activate the rendering system for fast
motion frames with fewer afterimage. Press I H
to select the required option.
OFF Deactivate
MODE1 Setting for a standard image
MODE2 Setting for a moving image
J COLOUR MANAGEMENT
You can manage your own defined colour settings.
See “Setting your own colour profile” on page 26.
J x.v.Colour
You can switch on/off the automatic adjustment
system for signals which comply with xvYCC.
ON: Active
OFF: Deactive
J DETAIL CLARITY
You can switch the automatic detail clarity system
on/off.
ON: Active
OFF: Deactive
J CINEMA REALITY
You can switch the automatic image synchroniser
on/off for 24 frames a second images, such as
movies. Press I H to select the required setting.
ON: Active
OFF: Deactive
J TV-SYSTEM
When the video signal is changed, the setting
switches automatically.
You can switch the setting manually to match the
video data. Press I H to cycle through the
options.
NOTE:
• MPEG NR system is not available with COMPUTER/
HDMI (VGA60) signals.
NOTE:
• With some of the images, it might be difficult to see a
difference in result.
• The image might look slower with the MODE2 setting.
When the result does not meet your requirement, select
MODE1 or deactivate the system.
NOTE:
• x.v.Colour adjustment system is available only with
HDMI signals in COLOUR1 of PICTURE MODE menu.
NOTE:
• CINEMA REALITY is effective only with interlace
signals.
AUTO NTSC
SECAM
NTSC 4.43
PAL-N
PAL-M PAL
NOTE:
• AUTO setting will select from NTSC/NTSC 4.43/PAL/
PAL60/PAL-M/PAL-N/SECAM.