Panasonic PT-AE3000E - Manual (Page 41)

LENS CONTROL
E
NGLISH - 41
Settings
You can edit named lens memory settings.
Q Deleting a memory setting
1. Select LENS MEMORY DELETE and press the
ENTER button.
2. Select the required lens memory setting and press
the ENTER button.
3. If you select ALL DELETE, you can delete all of
the saved lens memory settings.
4. Select OK in the confirmation screen and press the
ENTER button.
Q Changing the name of the memory
setting
1. Select the required lens memory setting and press
the ENTER button.
2. Rename the lens memory setting.
Use F G I H to specify the location of the required
character to enter and press the ENTER button.
3. Repeat step 2 until you finish the text line.
You can enter up to 16 characters.
Move the cursor to ALL DELETE and press the
ENTER button to delete all the entered text line.
Press the DEFAULT button to delete the last entered
character or indicted with the cursor in the text box.
To insert a character in the entered text line, move
the cursor to the text box to select the required place
and press G then perform step 2.
4. Select OK and press the ENTER button to set the
entered text as a name.
You can move the frame area horizontally, such as
aligning the right or left frame edge to the screen edge.
Press I H to move the frame.
You can move the frame area vertically, such as aligning
the up or bottom frame edge to the screen edge. Press
F G to move the frame.
LENS MEMORY EDIT
NOTE:
• The option that contains no saved adjustment will not
be displayed
• If you leave the text box empty and save, the default
memory name will stay as a name.
H-AREA POSITION
V-AREA POSITION