Setting up, Screen size and throw distance, Nglish - 14 – Panasonic FW100NTU User Manual

Page 14: Jcalculation methods for screen dimensions, Getting started

Advertising
background image

Getting Started

E

NGLISH - 14

Setting up

You can adjust the projection size with 2.0x zoom lens. Calculate and define the throw distance as follows.

* All measurements above are approximate and may differ slightly from the actual measurements.

J

Calculation methods for screen dimensions

You can calculate more detailed screen dimension from the screen diagonal.

SW (m) = SD (") x 0.0215

SH (m) = SD (") x 0.0135

LW (m) = 0.0289 x SD (") - 0.046

LT (m) = 0.0576 x SD (") - 0.061

* The results above are approximate and may differ slightly from the actual measurements.

Screen size and throw distance

Projection size (16 : 10)

Throw distance (L)

Screen Diagonal

(SD)

Screen height (SH)

Screen width (SW)

Minimum distance

(LW)

Maximum distance

(LT)

(0.84 m)

33"

0.44 m (1'5")

0.71 m (2'3")

1.8 m (5'10")

(1.02 m)

40"

0.54 m (1'9")

0.86 m (2'9")

1.1 m (3'7")

2.3 m (7'6")

(1.27 m)

50"

0.67 m (2'2")

1.08 m (3'6")

1.4 m (4'7")

2.8 m (9'2")

(1.52 m)

60"

0.81 m (2'7")

1.29 m (4'2")

1.7 m (5'6")

3.4 m (11'1")

(1.78 m)

70"

0.94 m (3'1")

1.51 m (4'11")

2.0 m (6'6")

4.0 m (13'1")

(2.03 m)

80"

1.08 m (3'6")

1.72 m (5'7")

2.3 m (7'6")

4.6 m (15'1")

(2.29 m)

90"

1.21 m (3'11")

1.94 m

(6'4")

2.6 m

(8'6")

5.1 m (16'8")

(2.54 m)

100"

1.35 m

(4'5")

2.15 m

(7')

2.9 m

(9'6")

5.7 m (18'8")

(3.05 m)

120"

1.62 m

(5'3")

2.58 m

(8'5")

3.4 m (11'1")

6.9 m (22'7")

(3.81 m)

150"

2.02 m

(6'7")

3.23 m (10'7")

4.3 m (14'1")

8.6 m (28'2")

(5.08 m)

200"

2.69 m

(8'9")

4.31 m (14'1")

5.7 m (18'8")

11.5 m (37'8")

(6.35 m)

250"

3.37 m

(11')

5.38 m (17'7")

7.2 m (23'7")

14.3 m (46'10")

(7.62 m)

300"

4.04 m (13'3")

6.46 m (21'2")

8.6 m (28'2")

17.2 m (56'5")

NOTE:

• See page 50 for the screen size and throw distance of 4:3/16:9.
• Do not use the projector at a raised or a horizontally tilted position as it may cause

malfunction of the projector.

• Make sure the projector lens surface is parallel with the screen. You can tilt the projector

body approximately ± 30° vertically. Overtilting may result in shortening the component’s
life.

• For the best quality of the projection image, install a screen where sun light or room light does not shine directly onto the

screen. Close window shades or curtains to block the lights.

SD

SW

SH

Screen

Projected image

Advertising