Panasonic FW100NTU - Manual (Page 16)

Getting Started
Setting up
E
NGLISH - 16
If the projector is not positioned right in front of the center of the screen, you can adjust the projected image position
by moving the Lens shift lever within the shift range of the lens.
J Adjusting the Lens shift lever
1. Open the Front panel cover.
2. Screw the Lens shift lever counterclockwise to
unlock.
3. Move the Lens shift lever to adjust the projected
image position.
4. Screw the Lens shift lever clockwise to lock.
Q Horizontal shift
You can place the projector where the projector lens is up to 24% horizontally off-center from the screen and
then adjust the image position with the Lens shift lever.
Q Vertical shift
You can place the projector where the projector lens is up to 57% vertically off-center from the screen and the
adjust the image position with the Lens shift lever.
Lens shift and positioning
Shifting the lever right:
Moving to screen’s
right.
Up to about 24 %
of the projection
Shifting the lever left:
Moving to screen’s left.
Up to about 24 %
of the projection
Up to about 57 %
of the projection
Up to about 57 %
of the projection
Shifting the lever down:
Moving to screen’s
bottom.
Shifting the lever up:
Moving to screen’s top.