Panasonic FW100NTU - Manual (Page 36)

Settings
OPTION menu
E
NGLISH - 36
If you use the projector at high elevation, the HIGHLAND
setting need to be ON to set the fan speed high. Press
I H to select the required option.
OFF The fan speed is low.
ON The fan speed is high.
If the input signal contains closed captions, you can turn
on the feature and switch the channels. Press I H to
select the required option.
You can use the 7 different test patterns to adjust the
focus of the image. See “Lens shift and positioning” on
page 16.
1. Press ENTER to display the test pattern 1.
2. Press I H to select the required test pattern.
3. Adjust the focus with the Focus lever.
4. Press MENU or RETURN to return to the previous
menu, oar press repeatedly to escape the menu
mode.
You can perform more detailed setting in various items.
J OSD DESIGN
You can change the background color of the menu.
Press I H to select the required option.
J SXGA MODE
You can switch the setting between SXGA and the
larger setting, SXGA+. Press I H to select the
required option.
J WIDE MODE
You can turn ON/OFF the WIDE MODE setting.
ON For WIDE signals
OFF For other type of signals
J BLACKBOARD
You can exclude the BLACKBOARD in menu
items of PICTURE MODE in PICTURE menu.
Press I H to select the required option.
ON Include the BLACKBOARD in menu
items.
OFF Exclude the BLACKBOARD in menu
items.
J BACK COLOR
You can choose a BLUE or BLACK screen for
when the projector is idle. Press I H to select the
required option.
J VOLUME
You can adjust the volume of the built-in monaural
speaker and VARIABLE AUDIO OUT terminal.
I Decrease
H Increase
J AUDIO BALANCE
You can adjust to hear the sound played equally
through both right and left external stereo
speakers, or shift the balance so more sound plays
through the left or right side.
I More sound plays through the left
side
H More sound plays through the right
side
J INITIALIZE ALL
You can reset all of the customized settings to the
factory defaults except NETWORK, LAMP
RUNTIME and FILTER REMAINING menu
settings.
1. Press the ENTER button
2. Turn off the projector by pressing the POWER
button.
3. Switch off the MAIN POWER button to reset the
projector.
4. The minimum required setting screen will be
displayed.
See “Minimum required setting screen” on page 10.
HIGHLAND
NOTE:
• At 1 400 m (4 593 ft) above sea level, the setting must
be ON.
• The loudness of fan noise depends on the HIGHLAND
setting.
CLOSED CAPTION
OFF Deactive
CC1
Caption channels
CC2
TT1
Text channels
TT2
TEST PATTERN
NOTE:
• When the projector and/or the screen is tilted, adjust
the focus at the centre of the image. The upper and
lower edge might be out of focus.
• When the image is distorted in keystone, adjust the
KEYSTONE in POSITION menu.
DETAILED SETUP
TYPE1 Semi transparent black
TYPE2 Solid blue
TYPE3 Semi transparent dark blue