Projecting 2 images at a time, Enlarging the centred area, Controlling the volume of the speaker – Panasonic FW100NTU User Manual

Page 26: Nglish - 26, Remote control operation, Basi c op eration

Advertising
background image

B

asi
c Op

eration

Remote control operation

E

NGLISH - 26

You can project the image and another
source of image at the same time in double
window style. Press any button of RETURN,
MENU, DOUBLE-WINDOW or INPUT
SELECT
buttons to return to the normal
projection style.

Q

Unavailable combinations

The following combinations are not available.

COMPUTER1 - COMPONENT

COMPUTER2 - NETWORK

S-VIDEO - VIDEO

S-VIDEO - COMPONENT

VIDEO - COMPONENT

Q

Switching the signal

In default, the first image is displayed on the left
and the second image is displayed on the right.
You can switch and cycle through the signals of the
second image by pressing F G

You can enlarge the projected image down
to a centred area for emphasizing within the
range of 1x to 2x.

Q

Enlarging the image

1. Press DIGITAL ZOOM +/- once.

The centred area of the image will then be enlarged
to 1.5x.

2. Adjust the image size by pressing DIGITAL ZOOM

+/-.

The image size will be changed in steps of 0.1.

Q

Shifting the centre point

Press F G I H to shift the centre point.

You can control the volume of the built-in
speakers and output sound. Press +/- to
control the volume.

Projecting 2 images at a time

NOTE:

FREEZE and VOLUME controls are available with the

first image only.

• While DOUBLE-WINDOW is activated, DIGITAL

ZOOM, INDEX-WINDOW and AUTO SETUP are not
available.

• While DOUBLE-WINDOW is activated, the main menu

will not be displayed.

• The second image will apply to the value of the

PICTURE settings of the first image except
CONTRAST and BRIGHTNESS.

COMPUTER and NETWORK signals will not keep the

adjusted aspect ratio.

Image 1

Image 1

Image 2

NETWORK

COMPUTER2

COMPUTER1

S-VIDEO

COMPONENT

VIDEO

Enlarging the centred area

NOTE:

• When the COMPUTER signal is projected, the

enlargement range will be changed to 1x to 3x. When
the FRAME LOCK in POSITION menu is set to ON, the
enlargement range is 1x to 2x. See “FRAME LOCK” on
page 33.

• When the input signal is changed while the DIGITAL

ZOOM is activated, the DIGITAL ZOOM will be
cancelled.

• While DIGITAL ZOOM is activated, FREEZE is not

available.

Controlling the volume of the speaker

NOTE:

• Power consumption can be reduced if the volume level

is lowered.

Advertising