Panasonic CF-R1 - Manual (Page 34)

34
LAN
Using LAN
When using the computer as a network computer, some additional settings may
have to be made depending on the usage conditions. We recommend asking
your system administrator or the person in charge of the network.
Do not use the standby or hibernation functions during communications
(except when the Wake up from LAN function is in use), as this may
cause an error in data transmission or reception. The timeout function
may engage even during data transmissions, causing the computer to
automatically go into standby or hibernation mode. When not using the
Wake up from LAN function, we recommend disabling the timeout func-
tion using the following menu:
Windows 2000 : [Control Panel] - [Power Options] - [Power Schemes]
Windows XP
: [Control Panel] - [Performance and Maintenance] -
[Power Options] - [Power Schemes]
If you are unable to connect to the network (when the indicator of your
HUB unit does not light):
1 Windows 2000
Select [Device Manager] in [Start] - [Settings] - [Control Panel] - [Sys-
tem] - [Hardware].
Windows XP
Select [Device Manager] in [start] - [Control Panel] - [Performance and
Maintenance] - [System] - [Hardware].
2 Select the network card you are using from [Network adapters].
3 Select [Advanced].
4 Confirm the settings of each item.
Using the computer as a network computer
NOTE
LAN