Panasonic CF-R1 - Manual (Page 7)

7
Standby/Hibernation Functions
Standby Mode
or
Hibernation Mode
The computer should be set for standby or hibernation function. ( page 6 ).
(After releasing your finger from the
power switch, do not touch the power
switch until the power indicator goes
off or blinks.)
With the method below, you can shut down the computer by using the standby
function.
Fn + F7 ( page 2 )
Windows 2000
In [Start] - [Shut Down], select [Stand by].
Windows XP
In [start] - [Turn Off Computer], select [Stand By].
With the method below, you can shut down the computer by using the hiberna-
tion function.
Fn + F10 ( page 2 )
Windows 2000
In [Start] - [Shut Down], select [Hibernate].
Windows XP
In [start] - [Turn Off Computer], press and hold Shift , then select [Hibernate].
Shutting Down Using the Standby or Hibernation Function
CAUTION
NOTE
* When the speaker function is disabled, e.g., by setting [Disable] for [Speaker] with the Setup
Utility ( page 37 ) or by the key combination Fn + F4 , there will be no beep sound.
Slide the power switch; at the “beep*” sound,
release your finger
At the “beep*” sound, release your finger from the power switch. If you continue
to slide the switch and hold it for more than four seconds, the computer will emit
a second “beep*” then power off. Data not previously saved will be lost.
Windows 2000
Even if, [When I press the power button on my computer:] is set to [Power Off]
with [Control Panel] - [Power Options] - [Advanced], the power switch is slid for
more than four seconds and is not released, a second “beep*” will sound and the
power will go off, although the computer will not completely shut down.
Windows XP
Even if, [When I press the power button on my computer:] is set to [Shut down]
with [Control Panel] - [Performance and Maintenance] - [Power Options] - [Ad-
vanced], the power switch is slid for more than four seconds and is not released,
a second “beep*” will sound and the power will go off, although the computer will
not completely shut down.