Panasonic CF-R1 - Manual (Page 39)

39
Setup Utility
Disable
Enable
Disable
Enable
Leave Set
Set and Eject
To the sub-menu
To the sub-menu
Disable
Enable
Disable
Enable
No Protection
Protected
To the sub-menu Password on boot
SD Startup* 1
SD Setting Method* 1 * 2
Clear Registered SD Card* 1
Set Supervisor Password
Display Boot Menu
Hard Disk Lock* 3
User Password Protection
Set User Password* 3
Security Menu
Password on boot [Enable]
Set Supervisor Password: [Enter]
Display Boot Menu [Enable]
Hard Disk Lock: [Disable]
User Password Protection: [No Protection]
Set User Password: [Enter]
* 1 This is displayed only when an SD memory card has been registered.
However, [SD Startup] and [SD Setting Method] cannot be set if [Pass-
word on boot] is set to [Disable].
* 2 This can be set only if [SD Startup] has been set to [Enable].
* 3 Setting impossible when the Supervisor Password is not set.
( : Default)
Parameters
When the Setup Utility is started up with the User Password;
The User Password can be changed only when [User Password Protection] has been
set to [No Protection]. The User Password cannot be deleted.
Only [Password on boot] and [Set User Password] will be displayed.
NOTE