Technical information, Network, Display resolution and colors – Panasonic CF-R1 User Manual

Page 42

Advertising
background image

42

Technical Information

Network

When the power saving function is running, communications software may malfunction. For
example, communications may be halted if the standby (hibernation) mode is activated. The
computer must be restarted if one of these modes is entered during data communications.
Be sure that the power of the display is cut (for energy conservation purposes) or the
computer enters standby (hibernation) mode after the communications software is closed.

Windows 2000

When network or communication software is to be used, set [Turn off monitor], [Turn off
hard disks], [System standby] and [System hibernates] (in [Start] - [Settings] - [Control
Panel] - [Power Options]) to [Never].

Windows XP

When network or communication software is to be used, set [Turn off monitor], [Turn off
hard disks], [System standby] and [System hibernates] (in [start] - [Control Panel] -
[Performance and Maintenance] - [Power Options]) to [Never].

Windows 2000

Set [DualApp] and [DualView] to [OFF] in [Start] - [Settings] - [Control Panel] - [Display]
- [Settings] - [Advanced] - [Lynx3DM+]. (The factory default setting is [OFF].)
These functions do not work properly with this computer.

Windows XP

Set [DualApp] and [DualView] to [OFF] in [start] - [Control Panel] - [Appearance and
Themes] - [Display] - [Settings] - [Advanced] - [Lynx3DM+]. (The factory default setting
is [OFF].)
These functions do not work properly with this computer.

Special Modes

Precautions When Using a CardBus Type LAN Card

Prior to usage, optimize the LAN card settings by following the procedure given below.

Failure to do so may result in an error message being displayed when performing a
copy operation via the LAN card with a computer on the network.

1

Select the network card you are using from [Network adapters] in [Control Panel] -

[System] - [Hardware] - [Device Manager]

2

Select [Advanced], select [Store And Forward] from [Property], then set [Enable] for

[Value] if it is set to [Disable]

(This item may be unavailable for some types of network cards.)

Windows 2000

Display Resolution and Colors

After changing the display resolution or number of colors using [Start] - [Settings] -
[Control Panel] - [Display] - [Settings], be sure to reboot the computer.

Windows 2000

When Using the Files on the Retail Version of the Windows CD-ROM

The Windows files included in the Retail Version of the Windows CD-ROM for each OS
are contained in the following folders:

Windows 2000

c:\winnt\cdimage\bootdisk,

c:\winnt\cdimage\discover,

c:\winnt\cdimage\i386,

c:\winnt\cdimage\setuptxt,

c:\winnt\cdimage\support,

c:\winnt\cdimage\valueadd

Windows XP

c:\windows\docs,

c:\windows\i386,

c:\windows\support, c:\windows\valueadd

Advertising