Panasonic CF-T2 Series - Manual (Page 14)

14
Touch Pad
To scroll up (trace counter-clockwise)
Scrolling will begin more easily if you start from the position marked by the and
trace as indicated by the arrow.
z On screens that cannot be scrolled (e.g., desktop screen), if you use the touch
pad as described in Step
3
( Î page 13 ), the computer may try to scroll the
screen, causing the cursor to freeze. If this happens, remove your finger from
the touch pad and begin again, this time starting from the center of the touch
pad.
4
Once scrolling has begun, continue to trace a circle on the touch pad
without removing your finger from the pad.
z As long as you are tracing a circle, you can continue scrolling using any position
on the touch pad. It is not necessary to trace a circle around the edge of the
pad.
z To scroll in the opposite direction, trace a circle in the opposite direction without
removing your finger from the touch pad.
5
When you finish scrolling, remove your finger from the touch pad.
Hints for Easier Touch Pad Operation
z You can change various touch pad settings using the following procedure:
[start] - [All Programs] - [Panasonic] - [Touch Pad utility settings]
Settings can be changed for the following functions:
• Use Touch Pad function (On/Off)
• Display icon in task tray (On/Off)
• Animated icon in task tray (On/Off)
• Rotate icon when wheel is operated (On/Off)
• Scroll item under mouse cursor (On/Off)
• Scroll speed setting
• Set initial scroll scope