Panasonic CF-T2 Series - Manual (Page 50)

50
SD Memory Card/MultiMedia Card
• Remove the labels on the card / Attach other labels or seals to the card
z Do not leave the card in the following locations:
• Locations that can become very hot, such as inside a car that can become hot, or in
direct sunlight.
• Dusty locations or locations that are very humid.
• Locations subject to corrosive gas, etc.
„ When logging on to Windows/ resuming from standby or
hibernation mode
z Do not remove or insert the SD memory card until Windows has completed loading.
z After resuming from standby or hibernation mode, do not access the SD memory card for
about 30 seconds.
„ Protecting important data
z Set the write-protect switch (A) to the LOCK position. Unlock the switch when you want to
record (checkout), edit, or save data.
z Use an oil-base felt-tip pen to write in the memo area (B) on the card. Do not use a pencil
or ball-point pen. Doing so can damage the card body or destroy data stored in the card.
z Do not remove the card or turn off the device in the following cases. Doing so can destroy
data stored in the card.
• While data is being read from the card
• While data is being written to the card, or for a short time after the writing operation
• While the SD memory card indicator ( ) is lit
(Note that Panasonic assumes absolutely no liability for any loss of data recorded by the
user, or any other damages, direct or indirect.)
z We recommend backing up important data to another storage medium.
z When disposing of cards, we recommend that you physically destroy the card (for
example, using a hammer) to prevent personal or confidential data from being leaked.
MultiMedia Card (MMC)
The MultiMedia card can be used in ways such as the following.
z Storing files, etc.
z Use to exchange data with devices equipped with a MultiMedia card slot.