Panasonic CF-T2 Series - Manual (Page 78)

78
Wireless LAN
MAC address using the following procedure and register it according to the operating
instructions of the access point.
A Display [Command Prompt].
Select [start] - [All Programs] - [Accessories] - [Command Prompt].
B Input [ipconfig /all], and press Enter.
C Make a note of the 12-digit string of alphanumerics displayed on the wireless
LAN's "Physical Address" line. Then input [exit], and press
Enter.
„ The IP address of the access point is wrong
z Following the operating instructions of the access point, set the IP address of the access
point again correctly.