Panasonic CF-T2 Series - Manual (Page 84)

84
Setup Utility
*1 This is displayed only when an SD memory card has been registered.( Î page 54 )
NOTE
z When the Setup Utility is started up with the User Password;
• [Clear registered SD card], [Set Supervisor Password] and [Hard Disk Lock] will not
be displayed.
• [Password on boot], [SD Startup], [SD Setting Method], [Setup Utility Prompt], [Boot
First Menu] and [User Password Protection] will be displayed, but cannot be set.
• The User Password can be changed only when [User Password Protection] has
been set to [No Protection]. The User Password cannot be deleted.
„ Parameters
(Underline indicates settings at the time of factory shipment.)
Security Menu
Password on boot: [Enable]
SD Startup: *1 [Enable]
SD Setting Method: *1 [Leave Set]
XClear registered SD card: *1 [Enter]
XSet Supervisor Password: [Enter]
Setup Utility Prompt: [Enable]
Boot First Menu: [Enable]
Hard Disk Lock: [Disable]
User Password Protection: [No Protection]
XSet User Password: [Enter]
Password on boot Disable
Enable
SD Startup *2 Disable
Enable