Panasonic CF-T2 Series - Manual (Page 70)

70
Modem
[System standby] elapses even during communications, and cuts off the
communications.
• If [Never] is set, the computer will not enter the standby mode during
communications, but once the computer resumes, the power of the computer will
remain on while the user is absent.
z When the Ring Resume function is being used, some time elapses before a
connection is established (equal to the time for the computer to resume). To allow the
computer to resume, set the "Call" to a larger value than a typical telephone call. If it is
not possible for the sending side to set a long "Call", set the "Number of rings until
answer" (with the software application that is able to maintain the condition to receive
telephone calls) to a small value.
*1 To display the setting for [System standby]:
Select [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Power
Schemes].
NOTE
z This function does not work when the computer is off or is in hibernation mode.
z After operations are resumed from standby mode, the screen remains dark. The
former screen display will be restored when the keyboard, touch pad or touchscreen is
touched.
z The computer cannot resume if a telephone is connected to the line of a modem (e.g.,
a PC Card modem) other than the internal modem.