Panasonic CF-T2 Series - Manual (Page 46)

46
PC Cards
This slot conforms to the PC Card Standard; therefore, communications and SCSI devices
may be utilized. The slot allows you to use one Type I or Type II card.
CAUTION
z Check the PC Cards' specifications. Be sure the total operating current does not
exceed the specified limit. Damage may result otherwise.
Allowable Current: 3.3 V: 400 mA, 5 V: 400 mA
z ZV card, SRAM card, FLASH ROM card (except for an ATA interface) and card
requiring 12V are not supported.
z With the repeated insertion/removal of a PC Card, the computer may no longer
recognize the PC Card (depending on the type of card). In such cases, restart the
computer.
z If the computer freezes after resuming from the standby or hibernation mode, try
removing and then reinserting the PC Card. If this does not correct the problem,
restart the computer.