Philips AXIS 5900 - Manual (Page 113)

Management and Configuration
AXIS 5900 User’s Manual 113
Example:
Typical Telnet session to view the Account File
Viewing
the Status file
The status command shows which printer port the logical printers are
assigned to, and their current status.
Follow the instructions below to view the status file using telnet:
1. Log in to the Axis Network Print Server by typing:
telnet <host name> or telnet <IP address> in a DOS windows
(Windows and OS/2) or in a UNIX shell window.
2. Enter the user id and the password. (The default entries are
root
and
pass
.)
3. View the status file by typing:
status
Performing Resets Three types of reset commands allow you to perform soft resets, to
perform hard resets, and to reset the print server’s parameters to its
factory default settings.
Follow the instructions below to perform a soft reset using telnet:
1. Log in to the Axis Network Print Server by typing:
telnet <host name> or telnet <IP address> in a DOS windows
(Windows and OS/2) or in a UNIX shell window.
2. Enter the user id and the password. (The default entries are
root
and
pass
.)
> telnet npserver
Trying 192.36.253.96...
Connected to npserver.
Escape character is ‘^]’.
Axis Network Print Server TELNET Print Server v7.00 Sep 06 2004
Axis Network Print Server network login: root
Password: pass (not visible)
Axis Network Print Server TELNET Print Server v7.00 Sep 06 2004
Root> account
Current account file:
JOB
USER PROT LPR S BYTES ETIME
1 Thomas FTP pr2 C 1885 2
2 Lisa LPT pr1 C 23074 4
3 RICHARD PSERVER pr2 C 43044 5
4 MacUser APPLE pr1 C 6717 2
5 LSLM_user NetBIOS pr2 C 36995 3
6 patrick PROS pr5 P 83208 9
Root>