Philips AXIS 5900 - Manual (Page 98)

Management and Configuration
98 AXIS 5900 User’s Manual
Setting the e-mail
Notification
Parameters
In order to set the e-mail addresses of the people to whom the trouble-
reports will be sent:
1. From your print server’s internal Web page, go to: Admin | Network
Settings | Detailed View | e-mail Notification. The following options will
appear:
2. Enter the respective e-mail addresses of the trouble-report recipients in the
blank fields as follows:
[email protected]
3. Click OK and exit when done.
Important:
Network Speed With the Network Speed parameter you can manually specify the speed at
which you will send and receive network packages.
Ethernet Network To change the Network Speed, log in to the print server’s internal Web
pages and click Admin | General Settings | General. From here you have
the option of setting the network speed to:
WLAN To change the Network Speed, log in to the print server’s internal Web
page and click Admin | Network Settings | Detailed View | WLAN. From
here you have the option of setting the network speed to:
Options E-mail recipient
Administrator e-mail Address This address will be used as “Reply to”-address in the e-mails
PAPER JAM The person responsible for handling paper jams in the printer
OUT OF PAPER The person responsible for filling the printer with paper
TONER LOW The person responsible for filling up the toner in the printer
NO TONER The person responsible for changing the toner in the printer
PRINTER OFFLINE The person responsible for the overall maintenance of printer
The SMTP Server parameter in the print server’s internal Web pages must be set so that it
corresponds to the SMTP server used in your network! This is set in: Admin | Network
Settings | Detailed View | TCP/IP Network | SMTP Server.
Network Speed
AUTO_SENSE
(default value)
The print server detects which speed is optimal for each network package
you transfer.
10_HALF__DX 10 Half Duplex
10_FULL_DX 10 Full Duplex
100_HALF_DX 100 Half Duplex
100_FULL_DX 100 Full Duplex
Network Speed
AUTO_SENSE (default value)
The print server detects which speed is optimal for each network package
you transfer.
1 Mbps
2 Mbps
5.5 Mbps
11 Mbps