Philips AXIS 5900 - Manual (Page 93)

Management and Configuration
AXIS 5900 User’s Manual 93
Admin When in Admin mode, you have access to all the print server's parameters
and you can change them to your liking. This mode is intended for
network administrators and can be password protected to prevent
unauthorized changing of the print server parameters.
Note:
Accessing the Web
Pages
Follow the steps below to access the internal Web pages of the Axis
Network Print Server:
1. Enter the print server’s IP address (or host name) in the Location/Address
field of your Web browser. Press Enter
2. The Printer Overview page will appear. Click Admin to access the
Administration Web pages.
3. If you have changed the User/Password combination, you will be prompted
for them. Click OK.
Note:
To protect the Admin pages from unauthorized use, it is highly recommended that you change
the default password.
This is done from the
Admin | General Settings | General tab. Enter the password in the Root
Password field.
• You can address the print server’s Web interface via https:// To do this you must enable
the SSL/TLS protocols in the Web interface: Admin | Network Settings | Detailed View |
TCP/IP Network and set the HTTPS Enabled parameter to Yes (you must have a valid cer-
tificate loaded). If you do not have a valid certificate loaded, select
Admin | Security
Settings and click Create.