Philips AXIS 5900 - Manual (Page 14)

Basic Installation (Wired & Wireless)
14 AXIS 5900 User’s Manual
Installation Overview
Select the appropriate method to establish a connection between the
workstation / laptop and the Axis Network Print Server. The following
descriptions provide an overview of the installation procedures:
• “Setting up Using the Ethernet Interface” on page 14
• “Setting up over the WLAN” on page 15
Setting up Using the
Ethernet Interface
• To establish communication with the network, an IP address must be
assigned to your Axis Network Print Server. See
“Assigning an IP
Address to the Print Server” on page 16.
• Once the connection has been established, proceed with creating a
certificate. See
Configuring the Axis Network Print Server for Wireless
Printing , on page 23.
• Next, enable https in the print server for secure Web services. See
Configuring the Axis Network Print Server for Wireless Printing , on page
23.
• Set the WLAN Network Mode and enter the SSID, WLAN channel and
WEP keys according to your network, see “Configuring the Axis
Network Print Server for Wireless Printing” on page 23
• The Axis Network Print Server must be restarted for the WLAN settings
to take effect. On power up, the Axis Network Print Server will
automatically select WLAN communication if there is no Ethernet cable
connected. Disconnect the network cable and disconnect and reconnect
the Axis Network Print Server power supply.