Philips AXIS 5900 - Manual (Page 26)

Basic Installation (Wired & Wireless)
26 AXIS 5900 User’s Manual
Configuring your Print Server
Configuration
Methods
Once you have set the IP address of your Axis Network Print Server print
server, it can be managed and configured over the LAN or WLAN using a
number of different methods. The method that you choose should be
dictated by your printing requirements and your supported network
environments. Select the appropriate method from the table below:
Windows
TCP/IP See “Adding Printers in Windows” on page 27
NetBIOS/NetBEUI See “Adding Printers in Windows” on page 27
IPP Proceed with “IPP - Internet Printing Protocol” on page 123
NetWare
IP/IPX
in PSERVER mode See “Setup using NDPS” on page 50 and then
“Queue-based Printing Methods” on page 74
IP/IPX
in Remote Printer
mode
See “Setup using NDPS” on page 50 and then
“Queue-based Printing Methods” on page 74
Macintosh AppleTalk See “Adding Printers in Macintosh” on page 42
UNIX/Linux
TCP/IP Proceed with “Adding Printers in UNIX/Linux” on page 76
IPP Proceed with “IPP - Internet Printing Protocol” on page 123