Panasonic DMR-E500H - Manual (Page 16)

16
RQT7394
Ge
tt
in
g s
ta
rte
d
STEP
5
Setting up the Network
Preparation
≥ Connect this unit to the Home Network. This can be directly to
another network compatible Panasonic DVD recorder
(
➡ page 10).
≥ Check the computer’s IP address setting ( ➡ page 18), if
connecting this unit and a computer when the DHCP on the
router is disabled.
1
Press [SETUP].
2
Press [ 3 , 4 ] to select “Network” and
press [ 1 ].
3
Press [ 3 , 4 ] to select “Network
Function” and press [ENTER].
4
Press [ 3 , 4 ] to select “Enable” and
press [ENTER].
5
Press [ 3 , 4 ] to select “TCP/IP
Settings” and press [ENTER].
6
Press [ 3 , 4 ] to select “Automatic
(DHCP)” and press [ENTER].
When connecting a computer via a router with its DHCP
disabled
Press [
3 , 4 ] to select “Manual” and press [ENTER]
( ➡ page 19, To manually enter the DVD recorder’s IP
Address).
7
Confirm that a connection has been
established.
Wait until the display changes (this may take a few minutes).
≥ “Now connected to the network.” is displayed if the
connection has been correctly established.
≥ “Cannot connect to the network.” is displayed if the
connection has failed. Check the LAN cable connection.
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
[Note]
While “Now updating the settings. Please wait for a while.” is
displayed, no operations will be accepted by this unit. Wait about 5
seconds until the highlights appear again.
∫ To change unit names
When more than one network compatible Panasonic DVD recorder
is connected on the Home Network, you need to give each a
unique unit name so that they can be distinguished.
(Factory preset: “DVD Recorder”)
After step 2 (
➡ left)
1 Press [ 3 , 4 ] to select “Unit Name Setting” and press [ENTER].
2 Enter the name ( ➡ page 46).
This unit’s network setting
POWER
VOLUME CH INPUT SELECT
DVD POWER
TV
TV/VIDEO
1
HDD SD/PC DVD
2 3
4 5 6
7 8
0
9
CM SKIP
AUDIO
PAGE
CH
CANCEL VCR Plus+
SKIP
STOP PAUSE PLAY/x1.3
SLOW/SEARCH
FUNCTIONS
ENTER
DIRECT NAVIGATOR
TOP MENU
RETURN SUB MENU
CHAPTER
SETUP
Info
PROG/CHECK TV GUIDE
REC MODE ERASE REC
STATUS
TIME SLIP DISPLAY
DUBBING
3 4 2 1
ENTER
RETURN SUB MENU
SETUP
¢ CANCEL
: 9
Numbered
buttons
SETUP
Disc
Video
Audio
Display
TV Screen
Channel
Set Up
Network Function
Enable
MAC Address
Unit ID
Status
Password : 00-08-97-24-01-C4
: 4284 1491 6862 6641
: 0000-0000-20LU-3DDE
3900-0V03-0M52-0L00
: No password
Disable
Network
≥ IP Address : Make a note of this IP address. You will
need it when operating this unit from the
computer.
SETUP
Disc
Video
Audio
Display
TV Screen
Channel
Set Up
TCP / IP Settings
Automatic (DHCP)
IP Address
Subnet Mask
Default Gateway
DNS Server : 192. 168. 0. 14
: 255. 255. 255. 0
: 192. 168. 0. 1
: 192. 168. 0. 1
Manual
Network
Audio
Display
TV Screen
Previous
Now connecting.
It may take a few minutes.
01/01 Next
Network
7394en.book Page 16 Wednesday, March 30, 2005 9:45 AM