Panasonic DMR-E500H - Manual (Page 26)

26
RQT7394
Re
cor
d
ing
Timer recording
Refer to the control reference on page 25.
1
Press [PROG/CHECK].
2
Press [CHAPTER] (Green).
3
Enter the settings.
≥ To enter the date
Press [ 3 , 4 ] to select “Date” and press the numbered
buttons.
(Date: Month/Day/Year)
≥ To enter the time
Press [ 3 , 4 ] to select “Start Time” or “End Time” and press
the numbered buttons.
–You can set up to 8 hours.
–To change am/pm
Press [ 2 , 1 ] to select “am” or “pm” and press [DUBBING]
(Blue).
≥ To enter the channel
Press [ 3 , 4 ] to select “Channel” and press the numbered
buttons.
–To select the input channel (L1/L2/L3/DV)
Press [DUBBING] (Blue).
≥ To change the recording mode
Press [ 3 , 4 ] to select “Quality” and press [DUBBING]
(Blue).
Each time you press the button:
≥ To change the recording drive
Press [ 3 , 4 ] to select “Destination” and press [DUBBING]
(Blue).
Each time you press the button:
HDD
,-. DVD
When the recording drive is “DVD” and there is not enough
remaining space, recording automatically switches to the
“HDD” (
➡ page 27, Relief Recording).
4
Press [ENTER].
≥ Press [CHAPTER] (Green) to change recording frequency.
Each time you press the button:
≥ To program other recordings
Press [ 3 , 4 , 2 , 1 ] to select “RECORD” and repeat steps
2–4.
5
Press [TV GUIDE].
Returns to the television screen.
≥ The unit is not off. To save power, turn the unit off by
pressing [ Í DVD POWER].
≥ When using the cable TV box, make sure the cable TV box is
turned on.
Notes on timer recording ➡ page 27
∫ To cancel recording when recording has already
begun
Press [ ∫ ], then [ENTER] within 5 seconds.
≥ You can also press and hold [ ∫ ] on the main unit for more than 3
seconds to stop recording.
Entering PlusCode ® number is an easy way of timer recording. You
can find them in TV listings in newspapers and magazines.
≥ You can enter up to 8 days in advance.
≥ VCR Plus i system works only after this unit downloads the
television program list ( ➡ page 12).
1
Press [VCR Plus r ].
2
Press [ 3 , 4 ] to select “PlusCode”.
3
Press the numbered buttons to enter
the PlusCode number.
≥ To correct the number
Press [ 3 ] and press [ 4 ]. Enter the number again from the
beginning.
Manually programming timer
recordings
LP # EP # FR # XP # SP
^==============}
FAVORITES
Sat 2:00pm Dodzilla Once
Sat 3:00pm Bull house Weekly
Sat 3:30pm Be switched Weekly
Sat 4:00pm Baseball Once
LISTINGS MESSAGES SCHEDULE
SET TIMER
R
R W
R W
R
RECORD
Date :
Start Time :
End Time :
Channel :
Quality :
Destination :
PlusCode :
4 / 1 / 04
8 : 00 pm
10 : 00 pm
56
SP
HDD
=========
[.
l
l
l
l
l
l
{
Records only once.
;
Records weekly.
;
Records daily (From Monday to Friday).
;
Temporarily cancels the program timer
recording without deleting the program setting.
Using VCR Plus i system to make timer
recordings
FAVORITES
Sat 2:00pm Dodzilla Once
Sat 1:00pm NWBG Once
Sat 3:00pm Bull house Weekly
Sat 3:30pm Be switched Weekly
4/3 4:00pm Baseball Once
LISTINGS MESSAGES SCHEDULE
RECORD
REMOVE FREQUENCY INFO.
87
NWBG
SP
HDD
R
R
R W
R W
R
1:00 1:55
R
R
W
R
D
R
Date :
Start Time :
End Time :
Channel :
Quality :
Destination :
PlusCode :
4 / 1 / 04
8 : 00 pm
10 : 00 pm
56
SP
HDD
=========
7394en.book Page 26 Wednesday, March 30, 2005 9:45 AM