Panasonic DMR-E500H - Manual (Page 27)

27
RQT7394
Re
cor
d
ing
4
Press [ENTER].
Repeat steps 1–4 to program other recordings.
≥ As long as the setting is not changed, the program is
recorded to the HDD in the recording mode selected by the
unit. To change the setting
➡ page 25, To change the
setting, steps 3 – 4 .
5
Press [TV GUIDE].
Returns to the television screen.
≥ The unit is not off. To save power, turn the unit off by
pressing [
Í DVD POWER].
≥ When using the cable TV box, make sure the cable TV box is
turned on.
∫ To cancel recording when recording has already
begun
Press [ ∫ ], then [ENTER] within 5 seconds.
≥ You can also press and hold [ ∫ ] on the main unit for more than 3
seconds to stop recording.
1
Press [PROG/CHECK].
2
Press [ 3 , 4 ] to select the program.
∫ To change the recording frequency
Press [CHAPTER] (Green).
∫ To change the time, recording mode and
recording drive
Press [ENTER]. ( ➡ page 25, To change the setting, step 4 )
∫ To delete the program
Press [DUBBING] (Blue).
∫ To exit the screen
Press [TV GUIDE].
Returns to the television screen.
≥ The unit is not off. To save power, turn the unit off by pressing
[ Í DVD POWER].
∫ When there is a duplicate or overlapping
program timer recording
The program timer recording that was set last is recorded. None of
the program that was set earlier is recorded even if there is only
partial overlapping.
Program timer recordings that are not recorded are highlighted in
grey.
Check, change or delete a program
FAVORITES
Sat 2:00pm Dodzilla Once
Sat 1:00pm NWBG Once
Sat 3:00pm Bull house Weekly
Sat 3:30pm Be switched Weekly
4/3 4:00pm Baseball Once
LISTINGS MESSAGES SCHEDULE
RECORD
REMOVE FREQUENCY INFO.
87
NWBG
SP
HDD
R
R
R W
R W
R
1:00 1:55
FAVORITES
Sat 2:00pm Dodzilla Once
Sat 1:00pm NWBG Once
Sat 3:00pm Bull house Weekly
Sat 3:30pm Be switched Weekly
4/3 4:00pm Baseball Once
LISTINGS MESSAGES SCHEDULE
R
R
R W
R W
R
SET TIMER
RECORD
Sat 1:00pm NWBG Once
REMOVE FREQUENCY INFO.
87
NWBG
SP
HDD
R
1:00 1:55
Channel or program name (a program name that was set
for timer recording using TV Guide On Screen
TM system
or VCR Plus i system that was listed in the program list)
Recording mode ( ➡ page 23)
Recording drive
Frequency ( ➡ page 25, 26)
Notes on timer recording
≥ “ F ” lights on the unit’s display to indicate that the unit is in timer
recording standby.
≥ “ F ” flashes when the unit cannot go to timer recording standby.
≥ Timer recordings are activated regardless of whether the unit is
turned on/off.
≥ Timer recordings begin when the set time is reached even
when recording or when playing.
≥ Timer recordings do not begin while transferring (dubbing) in
normal speed mode ( ➡ page 47).
≥ When you program successive timer recordings to start
immediately one after the other, the unit cannot record the part
at the ending of the earlier program (approximately 15
seconds). In addition, when recording to DVD-R, the unit
cannot record the part at the beginning of the later program
(approximately 15 seconds).
≥ If you set DST (Daylight Saving Time) to ON when manually
setting the clock ( ➡ page 13), timer recording may not work
when summer switches to winter and vice versa.
∫ Relief Recording
When the recording drive is set to “DVD” for timer recording and
if the program will not fit onto the disc, the recording drive will be
changed to the “HDD” automatically.
≥ If there is no disc in the tray or the disc cannot be recorded on
or when timer recording starts while transferring (dubbing), the
recording drive will be changed to the HDD.
≥ The Direct Navigator shows which programs were relief-
recorded (“ ” is displayed.)( ➡ page 30).
≥ If the time remaining on the HDD is insufficient, as much of the
program as possible will be recorded onto the HDD.
Program set last
Recorded
Time
Programs set earlier Not recorded
Not recorded
Program Program
Recorded
Not recorded
Recorded
Not recorded [DVD-R]
7394en.book Page 27 Wednesday, March 30, 2005 9:45 AM