Panasonic MDDDT5540 - Manual (Page 16)

-16-
Installation
Motor
Location
• Indoors, where the amplifier is not subjected to rain water and direct sun beams.
• Avoid the place where the amplifier is subjected to corrosive gases, flammable gases,
grinding liquids, oil mists, iron powders and cutting particles.
• Place in a well-ventilated, and humid- and dust-free space.
• Easy maintenance, inspections and cleaning is also important.
Environmental Conditions
How to Install
The motor can be installed either vertically or horizontally. Observe the following notes.
• Horizontal mounting
• Place the motor with the cable outlet facing down to prevent the entry of oil and water.
• Vertical mounting
• If a motor is coupled with a reduction gear, use a motor equipped with oil seal so that oil
in the reduction gear may not enter into the motor.
I t e m
Ambient temperature
Ambient humidity
Storage temperature
Storage humidity
Vibration
Shock
C o n d i t i o n s
0 to 40˚C (free from freezing)
Not greater than 85%RH (free from condensation)
-20 to 80˚C (free from freezing)
Not greater than 85%RH (free from condensation)
Cable
M o t o r
Oil and water
Oil and Water Protections
• This motor(IP65 rating) can be used where it is subjected
to water and/or oil drops, but is not water - or oil - proof.
Therefore, the motors should not be placed or used in
such environment.
• If the motor is coupled with a reduction gear, use the motor
with oil seals to prevent the reduction gear oil from
entering into the motor.
• Don't use the motor with the cables being immersed in oil
or water.
49 m/s2 (5G) or less at rotation, 24.5 m/s2 (2.5G) or less at rest
High precision and normal type: 24 m/s2 (2G) or less
Standard type: 49 m/s2 (5G) or less
98 m/s2 (10G) or less
High precision and normal type: 98 m/s2 (10G) or less
Standard type: 24 m/s2 (2G) or less
Motor only
With gear
(At rotation)
Motor only
With gear