Trial run, Inspections before trial run, Trial run ••••••••••••••••••• 44 – Panasonic MDDDT5540 User Manual
Page 44: 1) inspecting the wiring, 2) inspecting the power specifications, 3) securing the servo motor, 4) disconnecting the motor load, 5) releasing the brake
Advertising
- 44 -
1
2
3
4
5
6
7 8
9
0
STATUS
ALM CODE
GAIN
CN
SER
CN
I/F
CN
SIG
CN
POWER
CN
MOTOR
Controller
CN I/F
CN SIG
Motor
Ground
Machine
(motor load)
Power
Trial Run
Inspections before Trial Run
1) Inspecting the wiring
• Make sure that all wire connections (especially main power and motor output ) are correct.
• Make sure that there is no short, and earth wires are properly connected.
• Make sure that there is no poor connections.
2) Inspecting the
power specifications
• Make sure that the voltage is
correct.
3) Securing the servo motor
• Make sure that the servo
motor is firmly secured.
4) Disconnecting the motor load
Trial run without load
5) Releasing the brake
Advertising
This manual is related to the following products: