Panasonic DMC-LS80 User Manual
Page 106
- 10 -
Others
Connecting to a TV, computer or printer
Conditions
Causes
The picture does not
appear on the television.
The TV screen is
disturbed or displayed
in monochrome.
Is the camera connected to the TV correctly?
Set the TV to video input mode.
The display areas on
the TV screen and the
camera’s LCD monitor
are different.
Depending on the TV model, the area display may be smaller
so the picture may be stretched horizontally or vertically and
the top and bottom or left and right of the picture may be cut
off when it is displayed. This is due to the TV specifications
and is not a malfunction.
Cannot play motion
pictures on a television.
You cannot play motion pictures if you have inserted the card
into a card slot on a television.
Connect the camera to the television with the included AV
cable and play the pictures on this unit.
(P94)
The picture size does
not fit the TV screen.
Check the [TV ASPECT] setting on this unit.
(P23)
Cannot upload pictures
to your computer.
Check the connections.
Check that the computer has correctly recognised the
camera.
The computer does not
recognise the card.
(The built-in memory is
recognised.)
Disconnect the USB connection cable, then insert the card
and reconnect the cable.
The pictures cannot be
printed with printers.
Does the printer support PictBridge? You cannot print
pictures with printers which do not support PictBridge.
(P90)
The sides of printed
images are cut off.
If your printer has trimming and border settings, change the
settings so that there is no trimming and no border. (Read
your printer’s operating instructions.)
Some photography shops can handle pictures shot in
the [
j
] aspect ratio. Enquire before sending them for
printing.
•
•
Others
Conditions
Causes
Unreadable language
was selected by
mistake.
Press [MENU/SET], select the [SETUP] menu icon [ ] and
then select the [
{
] icon to set the desired language.
(P24)
Cannot change the auto
review setting.
Is auto bracket, [SELF PORTRAIT], [HI-SPEED BURST],
burst mode or motion picture mode [
i
] activated? You
cannot change the auto review setting when using these
modes.
■
■