Panasonic DMC-LS80 - Manual (Page 65)

-  -
Advanced-Shooting
[BURST]
Shooting in quick succession
When you press and hold the shutter button
several pictures are taken in succession.
Burst mode
Burst speed 2.5
fps Û
Approx. 2 fps
Number of
recordable
pictures
G
Max. 4
frames
Depending on
the remaining
capacity of the
built-in memory
/ card.
H
Max. 7
frames
Û The burst speed is constant regardless
of the transfer speed of the card.
The focus is fixed when the first picture
is taken. The exposure and the white
balance vary depending on the burst
mode setting. (When burst mode is set to
[
], they are fixed to the values set for
the first picture and when the burst speed
is set to [
], they are adjusted each
time you take a picture.)
When the self-timer is used, the number
of recordable pictures in burst mode is
fixed to 3.
In burst mode, the flash setting is fixed to
Forced Flash OFF [
v].
When the burst mode setting is set to
[
], the burst speed becomes slower
halfway. (The exact timing of this depends
on the type of card and each settings.)
The burst speed may become slower if the
ISO sensitivity is set to high or in dark places.
If you are following a moving subject while
taking pictures in a place where there is
a large difference between the light and
shade, the exposure may not become
optimal.
•
•
•
•
•
•
If you take pictures in burst mode with
the built-in memory, it will take time to
write the picture data.
In burst mode, auto review is activated
even if the setting is off.
Burst mode cannot be set in [STARRY
SKY] and [HI-SPEED BURST] modes.
Auto bracket mode setting is canceled
when [BURST] is activated.
T
[COLOR MODE]
Setting colour effects for the
recorded pictures
You can use following types of colour
effects depending on the image of the
picture.
Item Setting
STANDARD Standard setting
NATURAL
Shoot softer pictures
VIVID More vivid picture
B/W Black and white
SEPIA Sepia coloured pictures
COOL More blue
WARM More red
Picture noises might stand out when
taking a picture in a dark place. To avoid
picture noises we recommend setting
[COLOR MODE] to [NATURAL].
[COOL] or [WARM] cannot be set in
intelligent mode [
]. Also, [NATURAL]
or [VIVID] cannot be set in motion picture
mode [
i ]. Each recording modes are
set independently.
•
•
•
•
•
•
Press [ ] to display the [REC] mode menu and select the item to set. (P19)