Panasonic DMC-LS80 - Manual (Page 94)

-  -
Connecting to other equipment
Playing Back Pictures with a TV Screen
Playing back pictures using the AV
cable (supplied)
Set the [TV ASPECT]. (P23)
Turn the camera and the TV off.
Connect the AV cable A
(supplied) to the [AV OUT] socket
of the camera.
Connect the AV cable with the [ c]
mark facing the [q] mark on the [AV
OUT] socket.
Hold B and then insert or pull the AV
cable straight.
Connect the AV cable to the
video input and the audio input
sockets of the TV.
1
Yellow: to the video input socket
2
White: to the audio input socket
Turn the TV on and select
external input.
Turn the camera on and playback
the picture.
■
•
•
1�
•
•
2�
3�
4�
Do not use any other AV cables except
the supplied one.
You can display pictures on a TV only
when the recording/playback switch is set
to the playback [
Q ].
The top and bottom or left and right of
the picture may be cut off slightly when
it is displayed due to the characteristics
of the TV.
Read the TV operating instructions too.
Pictures might be slightly blurred if you
show them vertically on a television.
You can view pictures on TVs in other
countries (regions) which use the NTSC
or PAL system when you set [VIDEO
OUT] in the [SETUP] menu.
Playback pictures on TV with SD
Memory Card slot
You can put your SD Memory Card in a
television with an SD Memory Card slot to
show still images.
Depending on the television, some
pictures may not take up the whole
screen.
You cannot play motion pictures. To
play back motion pictures, connect the
camera to the TV with the AV cable
(supplied).
You can use SDHC Memory Card on
SDHC Memory Card compatible TV only.
You may be unable to play MultiMedia
Cards.
•
•
•
•
•
•
■
•
•
•
•