Panasonic DMC-LS80 User Manual

Page 54

Advertising
background image

-  -

Advanced-Shooting

When the aspect ratio setting is
[

j]

Item

Picture size

fps

30fps16:9

848 × 480 pixels 30 fps

10fps16:9

848 × 480 pixels 10 fps

fps (frame per second); This refers to the
number of frames used in 1 second.
You can record smoother motion pictures
with 30 fps.
You can record longer motion pictures
with 10 fps although the picture quality
is lower.
[10fpsQVGA]:
The file size is smaller, so the files are
suitable to be attached to e-mails.

Û

Set [ASPECT RATIO] to [

h] and the

[PICTURE MODE] to [30fpsQVGA] or
[10fpsQVGA] (320 × 240 pixels) when
you record motion pictures to the built-in
memory.

Press [MENU/SET] to close the
menu.

You can also press the shutter
button halfway to close the menu.

When you use the optical image stabilizer
function, only [MODE1] is available in
motion picture mode.
Refer to

P110

for information about the

available recording time.
The remaining recordable time shown on
the LCD may not reduce regularly.
This camera cannot take motion pictures
if you are using a MultiMediaCard.
When [PICTURE MODE] is set
to [30fpsVGA] or [30fps16:9], we
recommend that you use cards offering
“10 MB/s” or higher speeds (printed on
their packages and elsewhere) for best
results.
Depending on the type of SD Memory
Card or SDHC Memory Card, recording
may stop in the middle.

6�

We recommend using Panasonic’s SD
Memory Card/SDHC Memory Card.
Depending on the type of card you are
using, the card access indication may
appear for a while after shooting motion
pictures. This is normal.
Motion pictures can be recorded
continuously for up to 2 GB. The
maximum available recording time for up
to 2 GB only is displayed on the screen.
(DMC-LS80GC/DMC-LS80PL)
Motion pictures can be recorded
continuously for up to 15 minutes. The
maximum continuous recording time (up
to 15 minutes) is displayed on the screen.
(DMC-LS80EG/DMC-LS80E)
When motion pictures recorded with
this camera are played back on other
equipment, the quality of pictures may
be deteriorated or it may not be possible
to play them back. Also the recording
information may not be displayed
correctly.
When the brightness of the subject is
changed, the lens operation noise may
be recorded.
In motion picture mode [

i

] the following

functions cannot be used.

Direction detection function
[MODE2] on the optical image stabilizer
function

To hear audio recorded with movie,
recording must be played back on a
computer. This camera is not equipped
with a speaker.


Advertising