Aspect ratio, Intelligent iso, Aspect ratio] [intelligent iso – Panasonic DMC-LS80 User Manual

Page 61: P61)

Advertising
background image

- 1 -

Advanced-Shooting

i

[ASPECT RATIO]

Setting the aspect ratio of
pictures

By changing the aspect ratio, you can
select an angle of view that matches the
subject.

h

Select to take pictures with the
same aspect ratio as a 4:3 TV or
a computer monitor.

Select to take pictures with the
same 3:2 aspect ratio as 35 mm
film.

j

This is suitable for landscapes
etc. where a wide view is
preferable.
This is also suitable for playing
back pictures on a wide-screen
TV, high-definition TV etc.

You cannot choose [

] during motion

picture mode [

i].

The ends of the recorded pictures may
be cut at printing.

[INTELLIGENT ISO]

Changing ISO sensitivity
automatically

The camera detects the movement of the
subject and then sets the optimal ISO
sensitivity and shutter speed according to
the movement and the brightness of the
subject.
The settings listed below indicates the
selectable highest ISO sensitivity.

OFF

Intelligent ISO does not
work.

ISO MAX400 [MAX] shows the maximum

level of ISO sensitivity.
The ISO sensitivity
automatically increases up
to the set value.

ISO MAX800

ISO MAX

1250

[

] displays when you press the shutter

button halfway. If you press it fully, the
shutter speed and ISO sensitivity will be
displayed
Jitter is avoided when taking pictures
indoors of a moving subject by increasing
the ISO sensitivity and making the shutter
speed faster. (However, picture noise will
increase.)
Noise is avoided when taking pictures
indoors of a subject with no movement by
decreasing the ISO sensitivity.

Depending on the brightness and how
fast the subject is moving, jitter may not
be avoided.

When the moving subject is small
When the moving subject is at the edge
of the screen
When the subject starts moving the
instant the shutter button is pressed fully.

To avoid picture noise, we recommend
setting [COLOR MODE] to [NATURAL].
The digital zoom cannot be used.


Press [

] to display the [REC] mode menu and select the item to set.

(P19)

Advertising