Paxar 9474 User Manual
Page 129
Your batch begins printing immediately. Your tag should look like
this (with the date you entered).
A d j u s t i n g t h e P r i n t C o n t r a s t
You can adjust the print contrast to darken or lighten printing.
You can also print a test tag to check the adjustments you make.
The adjustment range is from -99 (lighter) to +20 (darker).
The normal print contrast setting (+00) prints accurate bar codes
on most tag or label stock; however, the contrast may change,
depending on the supply or ribbon used. If you change the print
contrast, use a bar code verifier or scanner to be sure your bar
codes scan correctly.
Screen Prompt
What You Do & What It Means
Select Operating Mode:
Data Entry
Press
e
.
Selects the Data Entry operating mode.
Data Entry Mode
Select Format: SAMPLE
Press
u
or
d
until you see the
format name SAMPLE, then press .
Selects the format named SAMPLE for
printing tags. The password to access
the print contrast option will be
requested.
7-10 Entering a Format