Paxar 9474 - Manual (Page 34)

When you first turn on the power, you’ll see
◆ the copyright message
◆ the date and time prompts if they are set.
2. If the printer was turned off with batches waiting to print, this
message:
Batches ready to print.
Enter START key to begin._
flashes on the display. After you finish the startup procedure,
you can either delete or print the batch(es). See "Monitoring
Batches," in Chapter 8 for more information.
3. If you see
Select Supply Type: B
A)lign, B)lack Mark or D)ie Cut
◆ press e for black-mark or aperture supplies.
◆ type D and press e for die-cut supplies.
4. If you see
Enter new date: 01/01/89
(MM/DD/YY)
◆ press e to keep the date shown.
◆ enter a new date in the format displayed in parentheses,
and press e . The date format is selected by your
system administrator.
◆ press C , then e to reset the date to 01/01/89. This
also removes the date prompt from start-up.
The date advances only while the printer is on. During
printing, the slashes (/) are automatically generated.
Getting Started 4-3